Products

Also Fits Gerber 163079 92-298 The same cartridge as American Standard 7034 AMS7034 American Standard OEM Part# M964406.0070A This cartridg...

Fits Danze Gerber Cartridge 507108 Fits Danze Gerber Cartridge 507107 4-inch handle ESC Trim Plate and Sleeves Sold Separately

includes 17300-3 cap for sleeve includes SL17300 Trim Plate Shown is Sold Separately, just for reference ESC17300

Fits Gerber 79780 Cartridge - See for reference.

Length: 4 inch OEM Part# DA603567 B-52 38 PT Spline Fits Danze 603567 Round Stem Cartridge for Single Handle Tub and Shower Faucets includes seats...

Fits RP 1991 cartridge and Balancing Spool PB1990 Special Order Available For RBK1991 Full Trim Plate and Cartridge repair kit. - Please inquire. 

Fits Delta Cartridges 8-inch diameter REF: ESC7900

Fits RP19804 Fits with Trim Plate 42-6806 Fits with Handle  46-0079 SL7900 Sleeve

Fits Tub Shower Cartridge RP19804 Series 1300 and 1400 Kissler Part Number 46-0079 Includes Set Screw Shower cartridge is NOT included, it is just...

Length: 2 inch B-19 Stem Replaces OEM Part# RP3560 Fits both hot and cold Fits group 4 Ref. RP1991 1600 Series Same as Glacier Bay  Typically uses...

Fits / Replaces RP46074 Delta Faucet Cartridge Ref. Cartridge Assembly - MultiChoice 13/14 Series Kissler 46-6074 Ref.  110mm in length - 4.3 in...

Typically works with PB1991 or Delta RP1991 Length: 1.75 inches Fits Glacier Bay Works with 

Fits  Delta RP2083-PB1745 Cartridge Hot and Cold Pair 95-1718

DE16213 1-1/4. inch 19pt BR Hole 18 with slot includes 2 stops also fits TEMPRESS II Grohe assembly ref: Delta Faucet OEM number RP16213 Screwdri...

MultiChoice Universal - 17 Series Length (in) 3 1/4 Broach see image includes adapter Dual-function volume and pressure balance temperature contro...

Fits 46-0538 Fits RP70538 cartridge

ABDE11524 DE11524 contains springs washers Allen key   RP3391M Jerich  

Includes adapters shown with screw 40mm diameter Height 3.75 inch rotary handle action

Fits most Delta single-handle faucets 36mm - 1.4 inch width 65mm - 2.5 inch length

D Broach Hole 43 Made From ABS Stop inside Chrome Finish

Includes small head screw for lever handles that have removeable inserts includes Allen key for installation 3 inch length D Broach Hole 43

Includes screw for handles that have removable inserts 3-1/8 inch length D Broach Hole 43 REF: PB12631 Fits Over RP2083 or PB1745

Fits RP2083-PB1745 Cartridge Sold as Pair

Fits RP2083-PB1745 Cartridge Sold as Pair

Fits Delta Cartridge RP70538 not included Fits Glacier Bay 874-5001 not included Fits Some Peerless Glacier Bay and Delta Cartridges Same Par...

Replacement for OEM RP70538 Same as 46-0538 Height 80mm OD 40 mm Length 3-7/8 inch Same as the Peerless single-function pressure balanc...

PB1745 Same as Delta RP2083 FIts two-handle faucets B-13 Stem Length 1-7/8 Stainless Steel Bottom REF: RP2083-17410

Fits Delta 1300 and 1400 Models Single Lever Faucet Series Plastic Cartridge OEM Part number  Length: 4 1/8" 10.2 x 7.6 x 7.6 cm 746-9804  

AB1953 Compliant Length: 3 3/4" replaces / fits American Standard 051120-0020A Built-In Pressure Balance Diverter

D Style Broach for handle mount RH and LH Hot and Cold set included Jerich REF 17481 Kissler 11-1748H / C Banner REF Dominion REF

5-1/2 inch length 20PT Euro handle stem Hole 2 13/16-14 G1/2 BSP Hot and Cold set of 2 cartridges 71631LF and 71632LF 3/4 Inch base measurement

2 inch length 25mm diameter square rectangle broach for handle 2 alignment pins Dornbracht ref: 9015050420090

Length: 2" Thread OD 13/16" 20pt spline B-37 AB1953 Compliant available in both hot and cold  

Length: 2" Thread OD 13/16" 20pt spline B-37 AB1953 Compliant available in both hot and cold  

Both pieces included in this set 26071 and 26072 2-3/4 inch length 20pt EURO Hole 2 for stem handle attachment  Replacement for ELJER  

For Encore Brand Pre-Rinse Commercial Faucets ENC-KL50-Y006 Long Barrel Fits most K77/KN50/60/80 series faucets. Encore / Powers

Fits Paini 690 Fits Kohler 405 Fits Kohler 672 Fits Price Pfister 974-0750

35mm diameter 56mm length 2 alignment pins 3 o- rings Square broach for handle

brass with internal shaft screw 20pt Hole 13 2 inch length but easy to cut to size

SZHW14GM REF.  28mm Diameter 51mm length not including alignment pins REF: 46-6220 Kissler  

12pt Stem with set screw included

open style design for tub shower handle replacement  Fits 10mm broach stem uses 2.5 mm Allen with screw provided Kissler Ref. 46-5163 Fits HC180 ...

46-4000 Typically Fits 35mm Square broach bathroom or kitchen style handles 2.5mm set screw use 2.5 Allen key to install 9mm broach stem hole  

FC94100XRO uses included 2.5mm set screw for installation  fits tub shower cartridges 10mm style broach stem hole same as Dominion Handle 46-3102

This set includes a hot and cold set OEM purchased directly from Gerber Parts Only one set is in stock 52mm Length

Jerich REF includes 17451 and 17452 HOT and COLD cartridges 1-7/8 length D Broach Hole 43 Tab Side of Port Fits Moen Fits Danze Fits Matco

Fits A507180 Jerich REF includes 17551 and 17552 HOT and COLD cartridges 1-7/8 length D Broach Hole 43 Tab Above Port